Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Tygon Microbore Tubing, Non-DEHP, 0.010 in ID, 500 ft
Tygon ND 100-80 microbore tubing is a non-DEHP medical-grade thermoplastic designed for precise microfluidic and medical device fluid transfer. It offers Class VI biocompatibility and a higher durometer for improved pressure resistance at very small diameters.
- Non-DEHP medical thermoplastic
- 0.010 in ID x 0.030 in OD, 0.010 in wall (0.25 mm x 0.75 mm, 0.25 mm)
- Packaged length 500 ft (150 m)
- Meets USP <88> Biological Test for Plastics, Class VI (fluid path)
- Suitable for drainage systems, diagnostic equipment, and pressurized fluid transfer
- Microbore size compatible with peristaltic pumps and analytical instrumentation
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Flexelene FX4-6N FX Flexible Polyethylene, Non-DEHP 1/4 x 3/8"" Tubing, 100 Ft
Applications:Food and beverage processing, instrumentation, pure-water transfer, water conditioning, Characteristics: Plasticizer-free, 78 A durometer, can be used with barbed fittings, abrasion-resistant, excellent chemical compatibility, economical. Colored Flexelene™ tubing available upon request. Certification: Produced with compounds listed by NSF International Standards 51 and 61, and are FDA compliant Temperature range:-40¿F to 170¿F (-40¿C to 76¿C) Sterilize: With ethylene oxide
Accuflow Systems C-Flex™ 374 formulation tubing, 50-foot, ID 0.063"" x OD 0.125"" x Wall 0.031"" is manufactured from pharmaceutical-grade thermoplastic elastomer, fully validated and tested to a variety of specifications.
C-Flex is the original patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing. C-Flex tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex is suitable for sterilization by gamma irradiation and autoclave. C-Flex is moldable, bondable and formable ideal for single-use assemblies, overmolds, tubing and bags manifolds. C-Flex tubing is manufactured from pharmaceutical-grade thermoplastic elastomer, is fully characterized, validated and tested to a variety of specifications. Extensive biological, chemical, physical properties and extractable testing is available to assist in the validation of C-Flex application. Sealable and weldable either pre- or post-sterilization. Sterilizable by gamma irradiation and autoclave. Complies with USP Class VI and ISO standards.
AVANTOR MASTERFLEX (VWR LLC) TYGON TBING 1/2IN 11/16OD 25FT
NC3367749 TYGON TBING 1/2IN 11/16OD 25FT
Alzet ALZETTM Mouse Jugular Catheter: Optimized for Jugular Delivery from any ALZET Osmotic Pump
This ALZET catheter connects to any ALZET Osmotic Pump to enable continuous IV delivery of test agents in mice. EtO sterilized and ready for immediate use.Catheter Material: PolyurethaneSpecifications: 9 cm total length; distal tip 1 Fr; internal volume ~10 μlOptimum Animal Size: 30+ grams (insertion marks for adaptation to smaller animals)Features & Benefits:•Retention beads at 1.3 and 3.8 cm from the tip facilitate anchoring to tissue•ALZET connection provides secure fit to all pump models•Catheter tip optimum for use with other small vessels (e.g., femoral, carotid, etc.)•Marked at 0.9 and 1.1 cm to simplify adaptation for animals weighing <25 g and 25-30 g respectively
Perkin Elmer US LLC Tygon R3603 Tubing - 1 ft x 0.375 in O.D. x 0.25 in I.D.
Tygon R3603 Tubing - 1 ft x 0.375 in O.D. x 0.25 in I.D.
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P High-Performance Precision Pump Tubing, Norprene Food, I/P 88; 25 ft
Masterflex Norprene Food High-Performance Precision pump tubing is formulated to withstand extreme temperatures and will not deteriorate in demanding food and beverage applications. This tubing is compatible with virtually all commercial clears and sanitizers and can be sterilized via autoclave without impacted overall service life. Ideal for food and beverage applications, this tubing complies with FDA, NSF, and 3-A standards.